DYNAMO D12
ALL THE ENERGY YOU NEED
Overview



Overview
Energy Independence, Zero Impact
The unique ability of efficiently coping with different renewable sources finds its direct analogy with the Platonic form of the Dodecahedron.
Dynamo’s D12 solution produces and accumulates electric and thermal energy from renewable and free sources such us the sun, wind and air. All the components of the machine are managed by a single control system that can be accessed remotely to check, in real time, production and energy storage.
Energy Power
7Kw
Electric power
30Kw
Thermal power for heating and cooling
16kWh
Electric storage
Energy Power
Produce and store your clean energy
Dynamo helps reduce its energy footprint by producing and storing clean electric and thermal energy, and hot water.
Dynamo D12 can satisfy the energy needs of a 1300 square meters building: heating, cooling, electricity and hot water production. D12 can be used either off-grid or grid-connected. The use of the dodecahedron, compared to a traditional energy system, can annually avoid the emission of about 30 tons of CO2.
Combining the energy flows of subsoil, water, air and sun the machines reach maximum efficiency
and meet all energy needs.

Compare Models
D12 S
D12 M
D12 L
Electric Power
7 kW
7 kW
7 kW
Electric Storage
16 kWh
24 kWh
32 kWh
Thermal power for heating (45°C)
30 kW
50 kW
100 kW
Thermal power for cooling (7°C)
30 kW
50 kW
100 kW
Customize your solution
How it works



How it works
`Dynamo D12 combines multiple technologies using natural resources to produce and store energy.
PV thin film covers the pentagons. The power of the photovoltaic system is expanded by the presence of a reflective screen at the base of the device (water, marble or other reflective materials). The solar light that strikes the reflective surface is reflected and spread in the direction of the dodecahedron pentagons facing downward.
The thermal heart of the machine is represented by an innovative geothermal heat pump and by two different storage systems. The heat pump can be also aero- thermal or hydrothermal, depending on the climatic and geological characteristics of the installation site.
The electrical energy of the photovoltaic panels ensure the power supply of the heat pump and its auxiliary equipment, while the electric battery can store the surplus of energy accumulated during daylight hours of greatest production and satisfy the building’s electrical needs. Energy input and output are managed and optimized by an innovative control system that maximises efficiency while also analysing weather forecasts.
Tech Specs



Tech Specs
DODECAHEDRON D12 - Zero Impact
The Dynamo D12 structure is preassembled and it is installed directly on site; all structural components are transported in containers. The backbone of the device is made up of 11 pentagons made in metallic tubes with 70 x 70 x 3 section, and by a special part representing the access door.

Tech Specs
Electric Power
Electric Storage
Thermal Power
Height
Depth
Width
D12 S
Electric Power
Electric Storage
Thermal Power
Height
Depth
Width
7 kW
16 kWh
30 kW
4450 mm
5230 mm
5500 mm
D12 M
Electric Power
Electric Storage
Thermal Power
Height
Depth
Width
7 kW
24 kWh
50 kW
4450 mm
5230 mm
5500 mm
D12 L
Electric Power
Electric Storage
Thermal Power
Height
Depth
Width
7 kW
32 kWh
100 kW
4450 mm
5230 mm
5500 mm
Operating temperatures
-4°F to 122°F / -20°C to 50°C
Installation
Floor mounted
Want to know more about DYNAMO D12?
Get updates